The OP 6.32 UNI opto-separator provides galvanic separation of the electricity supplier’s metering set and the customer’s monitoring equipment. Input side connection The instrument supports both common plus and common minus wiring polarity on the input side. Never connect both +24V and -24V terminals at the same time! Output side wiring Connection as current loop - open collector, max. current 100mA. From the consumer side connect GND to the SS voltage source (negative terminal of …

The GOU 6 is a six-channel single-ended device, developed as a special interface for the single-ended isolation of meter outputs. Its use must be approved by the territorial distributor. The GOU 6 is controlled by a microprocessor, which allows its adaptation to the requirements of many types of meters by means of eight DIP switches (located under the output terminal cover). Wiring GOU6 Power is connected to terminals 1 and 2.

The converter is designed to galvanically separate the impulse outputs of the meter from the monitoring and control equipment. The device enables the separation of active consumption pulse, active supply pulse, reactive consumption pulse, reactive supply pulse and registration period pulse. The operation of each channel is monitored by coloured LEDs on both the input and output sides of the transmitter. The wiring of the inputs is according to the following diagram, including the 230V power …